Recent Articles
Fuel level sensor calibration
Fuel level sensors are relatively simple devices with a few basic types that differ in how they measure fuel level. Regardless of the style, these sensors share a common feature: they send out a resistive signal (measured in ohms), which a Haltech ...
Multi-master CAN
Minimum FW version required The following firmware versions (or later) are required to ensure compatibility with the Multi-master CAN update for supported devices: Nexus ECU: 1.28.x Elite ECU: 3.12.x Nexus PD16: 1.09.x CAN Keypad: All keypads sold by ...
Discontinued Products
Information for discontinued or legacy Haltech products is still available for download on the Haltech website. Click on this link for Discontinued Software Click on this link for Discontinued Wiring Diagrams Click on this link for Discontinued ...
Adaptronic
Dear Adaptronic Customers, Adaptronic has been a part of the Performance Automotive aftermarket for 15 years and in that time we have been involved in some amazing builds, set world records, and brought first-rate electronics to the marketplace. It ...
Holden Commodore VE Accelerator Pedal Position (APP)
Overview Accelerator Pedal Position (APP) sensors provide pedal position information to the ECU. This device is used in conjunction with an electronic throttle body and an ECU that supports Drive-By-Wire throttle control (e.g. Elite 1500/2500, Nexus ...
Popular Articles
Honda K Series Engine
The Honda K-series engine is a line of four-cylinder four-stroke car engine introduced in 2001. The K-series engines are equipped with DOHC valvetrains and use roller rockers to reduce friction. The engines use a coil-on-plug, distributorless ...
1UZ-FE Engine
Information on the Toyota 1UZ-FE Engine Haltech ECU Options All Haltech ECU models can run the engine. Elite 1000 and higher is required to control the factory stepper motor idle valve. Elite 950, 2000, and 2500 are required for sequential ...
LY7 LE0 Alloytec Engine
Information on the GM LY7 High Feature Alloytec V6 engine. It will be referred to in this guide as the Alloytec. Haltech ECU Options The Elite 2000 can be used without DBW, the Elite 2500 is required with DBW. General Information Cylinders 6 ...
Honda / Acura B Series Engine
The B-Series engine was offered in Integras, Civics, Preludes, Accords, CRXs, Del Sols and CRVs. This engine had 28 different engine codes. The letter B is normally followed by two numbers to designate the displacement of the engine, another letter, ...
5.0L V8 Windsor (AU Falcon) Engine
Information on the 5.0L V8 Windor engine as found in the Australian Ford Falcon AU XR8. General Information Cylinders 8 Displacement 4942 cc / 302 ci Firing Order 1,3,7,2,6,5,4,8 Cylinder Orientation From front of engine 1,2,3,4 LHS 5,6,7,8 RHS CAN ...