Information on the Toyota 1UZ-FE Engine Haltech ECU Options All Haltech ECU models can run the engine. Elite 1000 and higher is required to control the factory stepper motor idle valve. Elite 950, 2000, and 2500 are required for sequential ...
LY7 LE0 Alloytec Engine
Information on the GM LY7 High Feature Alloytec V6 engine. It will be referred to in this guide as the Alloytec. Haltech ECU Options The Elite 2000 can be used without DBW, the Elite 2500 is required with DBW. General Information Cylinders 6 ...
Holden V8 5.0L EFI
The fuel injected 5.0L Holden V8 was used in the VN to VT Series 1 Commodore. Early models used a simple mutlipoint injection while the VT received some technical updates, such as sequential injection via a new distributor, wiring, and ECU. The ...
The Toyota 4AG DOHC 16V engine General Information Cylinders 4 Displacement 1587cc Firing Order 1342 Cylinder Orientation (from drivers seat) Cyl1 closest to timing belt Model Variants 4AGE 1st gen Blue Early Big Port - USDM Vane MAF, JDM MAP, ...
Information on the Toyota 1FZ-FE engine. The 1FZ-F is a carburettor version and is not covered in this guide. 80-Series 1FZ-FE with Distributor ignition 100-series 1FZ-FE with Waste Spark ignition and crank/cam sensors Haltech ECU Options Engine is ...