A lot of dash for not a lot of cash

A lot of dash for not a lot of cash


Haltech can now provide racers with complete engine management, data acquisition and display solutions. Haltech IQ3 Display and Logging dashes are powerful, professional high-tech systems allowing the user to sample and display both raw and calculated engine data that the Haltech ECU has on board.

The Haltech IQ3 dashes are designed to be a complete display centre with low-glare LCD display and multiple user programmable warning lights to make viewing essential engine information a breeze in all light conditions.


Haltech IQ3 display dash replaces all your gauges with one single digital display panel. Sourcing all its information directly from the Haltech ECU via a simple 2 wire CAN connection the Haltech IQ3 is the perfect data centre for any race enthusiast.

The IQ3 display dash is fully user configurable in its display properties and warning lamp illumination – a must have for that serious racing look.


The Haltech IQ3 data logger dash represents an entirely new concept in data logging dashes. By placing the 32 channel data logger, 2GB memory card, GPS and 3 axis G meter inside the dash, every feature of the data system is now located in one central location. Combine 32 external channels of data with quick 2 wire CAN connection to a Haltech ECU and you have a virtually limitless amount of data available for collection and analysis.

The Haltech IQ3 data logger dash is designed to be a complete data centre. All data is stored in a 2GB MicroSD memory card, located in the front of the dash between the programmable shift lights. This design ensures easy access to the memory card for data download.

For more technical, DIY and tutorial videos subscribe to our YouTube Channel.

For wiring information and quick start guides go to our downloads area.

    • Related Articles

    • How to connect and set up your IQ3 Street Dash

      The Haltech IQ3 Street dash is relatively simple to connect and set up. When configured correctly it’ll provide you with years of problem-free display and logging performance. There are two types of the IQ3 Street dash: Display and Logger. The ...
    • Haltech PD-16 CAN Protocol

      Multiplexing We're sending and receiving a lot of data. We'll multiplex our CAN messages to consume as few CAN IDs as possible. If a message is multiplexed then the first byte will be a multiplex ID used to identify the payload. The Multiplex ID has ...
    • List Display

      The list display allows multiple ECU channels to be viewed together. The list display can also be given a name. Channels can be added and removed by right clicking on the display. To Index
    • Trace Display

      Display The trace display shows the graphical history of any selected ECU channel. The trace display can have up to 5 channels at once. The focus of the trace display can be changed between the selected channels by clicking on the channel name within ...
    • Light Display

      The light display allows the user to see if an ECU channel is On or Off. The light display will illuminate when the channel value is greater than 1. This display is typically used for switched inputs and outputs that are either on or off. Channels ...