Air Conditioner Wiring

Air Conditioner Wiring

Air Conditioner Wiring Page


Options

Air Conditioner Output Enable

Enables or disables the A/C Output

Input Mode

Digital - Switched - Used where a simple switch will be used to request the A/C function
CAN Input - Used where a CAN device such as a Haltech CAN Keypad or OEM A/C controls are retained.

Compressor Mode

Digital - Switched - A DPO can be used to trigger the A/C compressor.
CAN Output - Used on compatible vehicles where the A/C compressor is controlled by a CAN based module.


    • Related Articles

    • Air Conditioner Pressure

      An Air Conditioner Pressure Sensor allows the ECU to continuously monitor the pressure of the air conditioning system for safety purposes. An analog Air Conditioner Pressure Sensor is a powered sensor that typically has three wires; a 5V+ power wire, ...

    • Air Conditioner Temperature Sensor

      An Air Conditioner Temperature Sensor allows the ECU to continuously monitor the temperature of the air conditioning system. Temperature sensors are typically two wire sensors; a signal wire that is connected to an AVI, and a signal ground wire.+ Air ...

    • Air Conditioner

      Air Conditioning Control The Air Conditioning (A/C) Control can perform two tasks. Air Conditioning Control can be used to assist in turning off the A/C compressor when under high loads. This allows more power to be used to drive the wheels. The A/C ...

    • Air Conditioner Control

      The Air Conditioning (A/C) Control can perform two tasks. Air Conditioning Control can be used to assist in turning off the A/C compressor when under high loads. This allows more power to be used to drive the wheels. The A/C Control output can also ...

    • Air Conditioner Temperature Sensor

      Wiring Tab Options Input Type Analogue Voltage Analogue Resistance CAN Input Connections Air Con Temperature Input AVI Pull up SPI Sensor Type Pull up Calibration Tab Display Tab Warning Minimum Diagnostics Tab Raw Min Raw Max Wiring Tab Options ...