Dash V1.34.0 Release

Dash V2.34.0 Release

V2.34.0 Release

Upgrade Notes

  • Requires NSP Version 1.46.3 or newer.

Features

  • Added Oil Over Temperature channel to all dashes.

Fixes

  • Haltech CAN

    • Now supports Oil Level and Clutch Pressure.
    • Now supports Nitrous Enable 1-4 Output States
    • Now Supports NOS Bottle Opener State and Exhaust Cutout State
    • Fixes Turbo Speed 1 and Turbo Speed 2 scaling.
    • Fixes Specific Humidity scaling.

  • Third Party CAN

    • ECUMaster now displays gear correctly.
    • OBDII now reads Ambient Air Temperature correctly.
    • OBDII now handles unsupported channels more effectively.

  • Fixes tables rounding to incorrect table cell along an axis with an axis mode of Discrete Centered and the axis values were consecutive integers.

  • Battery Light Output Channel State now correctly shows as "On" and "Off".

  • Outputs that support PWM but are configured as a switched output now only display the pin state.

  • Transmission Oil Temperature Switch Input State now correctly shows as "Ok"and "Over Temp".

  • Added a warning when an on‑board data logging group contains channels but is disabled.

  • Fixes Fuel Level Sensor ignoring Input Type setting.

  • Dash displays an error message if error conditions are met, instead of displaying a large negative number.

  • Fixes external device nodes flickering on the NSP navigation tree when it's connected but not enabled on the Haltech CAN System menu.

  • Moves Peak Values menu under Functions.

    • Adds enable setting for the Peak Values Input.

  • Fixes Device Timeout channel messages from Dash to ECU.

  • When Haltech CAN System is selected, Enable External IO Control option is automatically selected by default