DBW Open Rate Damping

DBW Open Rate Damping

DBW Open Rate Damping Table



This table sets The damping level applied to the electronic throttle when opening. This is used to soften the feel of the throttle to make it less sensitive to sudden movements, with higher numbers giving more dampening. To disable this set to zero. The maximum dampening available is 10.

    • Related Articles

    • DBW Close Rate Damping

      DBW Close Rate Damping Table The damping level applied to the electronic throttle while closing while engine demand is 2.5% or greater. To disable this set to zero. The maximum damping available is 10.

    • DBW Lift Rate Damping

      DBW Lift Rate Damping The damping level applied to the electronic throttle while closing when engine demand is lower than 2.5%. To disable this set to zero. Maximum damping available is 10.

    • Base - Open Loop

      In an Open Loop system, the ECU cannot make any adjustments to the idle control motor duty based on RPM feedback. his mean that the Base - Open Loop table fully controls the idle motor. The idle valve will simply move to the position set in this ...

    • Ignition Correction Attack Rate

      Attack Correction The Attack Rate table controls the rate in Degrees Per Engine Cycle at which the ignition timing can be advanced from a retarded value to a more advanced value. It is often used to smooth out the change in engine torque when there ...

    • Open Loop Tuning

      The Open Loop table allows boost to be increased over the standard boost that the turbo and wastegate combination provides. The turbo wastegate solenoid will only activate when it sees positive manifold pressure. To setup the Open Loop table, it will ...