Related Articles
Selecting cells
By default, one cell will always be selected in the tuning table. The selected cell is blue in colour and can be moved around the tuning table by using the 'Arrow' keys. If required, multiple cells can be selected, by holding down the 'Shift' key, ...
Mapping an Engine
Mapping the engine involves filling the look-up tables with the correct values for your engine. The tables are calibrated for an engine by adjusting the values of the cells within the tables. WARNING Driving a vehicle over time, on poorly tuned maps ...
Modifying Tuning Tables
WARNING: When tuning an engine, especially under load, it is advisable to have an indication of the Air-fuel ratio at which the engine is running. It is recommended that a wide-band oxygen sensor be used for this since it displays the Air-Fuel ratio ...
Selection
Select All Selects everything in view All Ranges Toggle All Ranges Mode of selection. All Ranges Above Toggle All Ranges Above mode of selection. Only available when All Ranges Mode is enabled. Align Aligns the cursor to current engine operating ...
Increasing and decreasing cell value
Once a cell selection has been made, its value can then be changed. The following is how cell values can be changed. Cell values can be increased by using the 'Page Up' key. Cell values can be decreased by using the 'Page Down' key. If smaller ...