Dual Intake Runner Wiring

Wiring

This node allows you to assign the output for the Dual Intake Runner output. Any available DPO (Digital Pulsed Output) or other output can be used.

• Related Articles

• Dual Intake Runner

  The Dual Intake Runner (DIR) function provides support for intake manifolds with a switchable intake length. Most DIR systems will operate over an Engine RPM band, turning on at a certain RPM and off again at a higher RPM. This function can be used ...

• Dual Intake Runner

  Dual Intake Runner The Dual Intake Runner (DIR) function provides support for intake manifolds with a switchable intake length. Most DIR systems will operate over an Engine RPM band, turning on at a certain RPM and off again at a higher RPM.  This ...

• Dual Fuel Tank Transfer

  The Dual Fuel Tank Transfer function enables the transfer of fuel from a secondary fuel tank into a primary fuel tank for dual tank equipped vehicles. Outputs available include the transfer pump, control solenoid and transfer light. Inputs available ...

• Intake Air Bleed Wiring

  This node configures the output to be used for the Intake Air Bleed. A DPO (Digital Pulsed Input) is typically used, but any available output is acceptable. 

• Intake Air Temperature Sensor

  An Intake Air Temperature Sensor measures the temperature of the incoming air to the engine. This information is provided to the ECU to determine the correct amount of fuel needed for optimum performance and economy. The information from this sensor ...