ECU Temperature

Haltech ECUs have an internal temperature sensor that is constantly monitored by firmware. If this internal temperature reaches an unsafe threshold, a DTC can be flagged which can be stored, or to trigger an Engine Protection strategy.

This node can be used to assign a Severity Level to each ECU Temperature DTC.

• Related Articles

• Differential Oil Temperature

  A Differential Oil Temperature Sensor can be used with your ECU for datalogging and for Driveline Protection purposes. Temperature sensors are typically two wire sensors; a signal wire that is connected to an AVI, and a signal ground wire. ...

• Fuel Temperature Sensor

  A Fuel Temperature Sensor can be used with your ECU for datalogging and for Engine Protection purposes. Temperature sensors are typically two wire sensors; a signal wire that is connected to an AVI, and a signal ground wire. Fuel Temperature Sensor ...

• Diagnostic Trouble Code (DTC) Index

  Powertrain Codes (P) Code Description Details P0003 Fuel Flow Sensor Raw Min P0004 Fuel Flow Sensor Raw Max P0070 Ambient Air Temperature Sensor Operating Min P0071 Ambient Air Temperature Sensor Operating Max P0072 Ambient Air Temperature Sensor Raw ...

• Coolant Temperature Sensor

  A Coolant Temperature Sensor can be used with your ECU for datalogging and for Engine Protection purposes. The Coolant Temperature sensor value is used for all temperature based corrections in the ECU such as warm-up enrichment, fuel corrections, ...

• Temperature Sensor Problem Diagnosis

  What is a Temperature Sensor A temperature sensor is actually a resistor that changes its resistance depending on temperature, typically using something called a thermistor. It is this resistance change that can be used by the ECU to interpret ...