Elite 1500/2500 CAN Communications Wiring Guide

• Related Articles

• REM Quick Start Guide

  The Race Expansion Module (REM) is used in conjunction with the Haltech Elite 2500 ECU to offer extra Input and Output functionally as well as advanced traction control and other advanced functions. Using the REM with the Elite 2500 allows sequential ...

• CAN Wideband Controller (WB1 and WB2) (Bosch LSU 4.9 Lambda Sensors)

  The Haltech CAN Wideband Controller is a plug and play product which increases the functionality of the Haltech ECU by using the Haltech CAN system which is available to all Elite and Platinum Series ECU's. It allows the user to accurately measure ...

• Traction Control User's Guide

  Introduction This is a guide on how to use the Traction Control Function for typical street or mild racing use.  This guide will focus on the newer Percentage Cut system found on Nexus VCU and Elite ECU with firmware v2.34-onwards.  The Percentage ...

• Power and Ground Wiring

  Black (Battery Ground) Red_Green / Red / Red_White (Battery Supply 12V) Pink (Ignition Switch 12V) Locate and connect the following flying leads.(Wiring based on the Haltech Elite Premium Harnesses)

• Elite 550 Basic Universal Harness Wiring Diagram