Elite 2000 Overview

Elite 2000 Overview


Features:


  1.  Waterproof Case (IP67 - only with pocket cover or waterproof USB Cable and USB Cap fitted)

NOTE: Waterproof USB Cable (HT-070002) and Waterproof USB Cap (HT-070004) are sold separately

  • 8 x Fuel Injection Outputs (Available as DPO if not used for injection)

  • 8 x Ignition Outputs (Available as DPO if not used for ignition)

  • 6 x Engine Position Inputs with extensive trigger type support

  • USB Laptop Communications up to 1 MB/s

  • Programmable Injector Peak and Hold Currents

  • OBDII Capable - Set and clear diagnostic trouble codes, view live engine data

  • ESP Calibration Software - Intuitive and easy to use

  • Dual CAN Bus communication for OBDII and Haltech CAN Expansion

  • Variable cam control - Independently control up to 2 Intake camshafts with auto tune capabilities

  • Short and Long term fuel,cam,boost and idle control learning

  • Dual Channel Knock Control - with high speed digital filtering for accurate detection

  • Multi-fuel Support - Support for Petrol (Gasoline),LPG, Methanol and Ethanol

  • E85 Flex Fuel Ready – Direct connection to sensor.

  • Closed Loop Boost Control – Multiple Modes – Tune by gear, wheel speed or time

  • Closed Loop Idle Control – With learning for consistent idle stability

  • Closed Loop 02 Control – Dual bank control for precise tuning

  • Anti-Lag and Launch Control – Drag and Rally modes

  • Data logging – Up to 20 channels of logging. Sampling rates up to 50ms

  • Engine Protection – Set limits for sensors and protect your engine

  • ECU comes fully enabled, no additional charges for advanced features



    • Related Articles

    • REM Overview

      The Race Expansion Module (REM) is used in conjunction with the Haltech Elite 2500 ECU to offer extra Input and Output functionally as well as advanced traction control and other advanced functions. Using the REM with the Elite 2500 allows sequential ...
    • Elite VMS / VMS T Overview

      The Haltech Vehicle Management System (VMS) is an ignition only ECU that is targeted at mechanically injected and carburetor drag racing vehicles. The VMS is a 1 stop, 1 cable solution for ignition timing control (8 channel), boost control, nitrous ...
    • Elite 750 Overview

      The Elite 750 is an entry-level ECU offering many features available on the more advanced Elite ECUs, at an affordable price. Featuring a robust, environmentally sealed, waterproof case, 6 fuel and ignition channels, on-board data logging and flex ...
    • Elite 2500 T Overview

      Haltech Elite Series ECUs take the art of Engine Management to a brand new level. With a waterproof case, drive-by-wire, exhaust cam and knock control, the Elite 2500 T ECU provide cutting edge technology to tuners and performance enthusiasts ...
    • Elite 1500 Overview

      Haltech Elite Series ECUs take the art of Engine Management to a brand new level. With a waterproof case, drive-by-wire, exhaust cam and knock control the Elite Series ECUs provide cutting edge technology to tuners and performance enthusiasts ...