Elite 2500 Overview
Haltech Elite Series ECUs take the art of Engine Management to a brand new level. With a waterproof case, drive-by-wire, exhaust cam and knock control, the Elite Series ECUs provide cutting edge technology to tuners and performance enthusiasts world-wide.
Features:
• Waterproof Case (IP67 - only with pocket cover or waterproof USB Cable and USB Cap fitted)
NOTE: Waterproof USB Cable (HT-070002) and Waterproof USB Cap (HT-070004) are sold separately
• 8 x Fuel Injection Outputs
• 8 x Ignition Outputs
• 28 x Digital Outputs
• 10 x Analogue Voltage Inputs
• USB laptop communications
• Drive By Wire (DBW) Throttle Control
• 6 x Engine Position Inputs with extensive trigger type support
• Programmable Injector Peak and Hold Currents
• OBDII Capable – set and clear diagnostics trouble codes
• New ESP calibration software – More intuitive and easier to use than ever
• Dual CAN Bus communications for OEM and Haltech CAN expansion
• User definable 5D Tuning – Tune by Gear, Cam Angle or any channel for ultimate tuning flexibility
• Variable Cam Control – Independently Control up to 4 camshafts
• Dual Channel Knock Control – With FFT analysis for accurate detection
• Auto Tune Capabilities – Short and Long term fuel, ignition & boost learning
• Staged Fueling – Up to four stages of injectors
• Multi-fuel Support – Support for Petrol (Gasoline), Methanol and Ethanol
• E85 Flex Fuel Ready – With additional boost tables
• Closed Loop Boost Control – Multiple Modes – Tune by gear, wheel speed or time
• Closed Loop Idle Control – With learning for consistent idle stability
• Closed Loop O2 Control – Dual bank control for precise tuning
• Anti-Lag and Launch Control – Drag and Rally modes
• Data logging – Internal memory & external laptop logging
• Multi Level Engine Protection – Set limits for sensors and protect your engine
• ECU comes fully enabled, no additional charges for advanced features
Related Articles
REM Overview
The Race Expansion Module (REM) is used in conjunction with the Haltech Elite 2500 ECU to offer extra Input and Output functionally as well as advanced traction control and other advanced functions. Using the REM with the Elite 2500 allows sequential ...Elite VMS / VMS T Overview
The Haltech Vehicle Management System (VMS) is an ignition only ECU that is targeted at mechanically injected and carburetor drag racing vehicles. The VMS is a 1 stop, 1 cable solution for ignition timing control (8 channel), boost control, nitrous ...Elite 750 Overview
The Elite 750 is an entry-level ECU offering many features available on the more advanced Elite ECUs, at an affordable price. Featuring a robust, environmentally sealed, waterproof case, 6 fuel and ignition channels, on-board data logging and flex ...Elite 2500 T Overview
Haltech Elite Series ECUs take the art of Engine Management to a brand new level. With a waterproof case, drive-by-wire, exhaust cam and knock control, the Elite 2500 T ECU provide cutting edge technology to tuners and performance enthusiasts ...Elite 1500 Overview
Haltech Elite Series ECUs take the art of Engine Management to a brand new level. With a waterproof case, drive-by-wire, exhaust cam and knock control the Elite Series ECUs provide cutting edge technology to tuners and performance enthusiasts ...