Elite Pro Plug-in Ford Falcon I6 Barra Quick Start Guide

• Related Articles

• Elite Pro Plug-in ECU to Suit Ford Falcon I6 "Barra"

  Vehicle Compatibility Ford Falcon BA (02-05) I6 4.0-litre DOHC VCT "Barra" Engine with Manual Transmission Ford Falcon BF (05-08) I6 4.0-litre DOHC VCT "Barra" Engine with Manual Transmission Ford Falcon BF (05-08) I6 4.0-litre DOHC VCT "Barra" ...

• Ford Falcon I6 Auxiliary Connector

  The Elite Pro Plug-in Series ECUs are equipped with an auxiliary connector, to provide access to a number of additional inputs and outputs. Each ECU purchase includes the Auxiliary Connector Kit (HT-131001), which contains 1 x auxiliary connector, 1 ...

• Plug-in Model Selection

  Plug-in Information Model Setup Some factory pin locations and functionality vary between vehicle variants. Upon making a Plug-In Information "Model" selection (referenced in Initial ECU Setup), the hardware configuration is set and the on-board ...

• Ford Falcon I6 Example Wiring Configurations

• 4.0L 6-cylinder Barra Turbo (BA to FG)

  Information on the Ford Barra 6-cylinder Turbo engine. The naturally aspirated engines are not covered here. BA Engine FG Engine General Information Cylinders 6 Displacement 3984 cc / 243.1 ci Firing Order 1,5,3,6,2,4 The engine comes standard with a ...