Elite Series Single Connector ECU Mounting Guide

• Related Articles

• Elite Dual Connector ECU Mounting Guide

  Welcome to Haltech Elite Preview of Haltech Dual ECU Connector Template To assist with the installation of your Haltech Elite Dual Connector ECU you can download the below linked PDF document which provides the measurements you need to get started ...

• Honda / Acura B Series Engine

  The B-Series engine was offered in Integras, Civics, Preludes, Accords, CRXs, Del Sols and CRVs. This engine had 28 different engine codes. The letter B is normally followed by two numbers to designate the displacement of the engine, another letter, ...

• Mounting Devices

  Locate a suitable location for the ECU. Ensure that the loom will reach the necessary parts of the engine and mount the ECU. A mounting template can be found on the inside of the packaging box sleeve for reference. Using the provided mounting ...

• Reasons For Selecting A Higher Spec Elite ECU

  The following is a guide to why in the real world you would want to select a higher model of Elite ECU over the more basic models.  It should be kept in mind that the ECU cannot be upgraded after purchasing. The correct model to choose depends on the ...

• Traction Control User's Guide

  Introduction This is a guide on how to use the Traction Control Function for typical street or mild racing use.  This guide will focus on the newer Percentage Cut system found on Nexus VCU and Elite ECU with firmware v2.34-onwards.  The Percentage ...