End RPM

• Related Articles

• RPM Limiter Correction

  This table controls the fuel correction applied as the engine RPM approaches the Main RPM Limiter End RPM.  Generally, a small correction is made just before the engine reaches the RPM limiter to help soften the effects of the limiter. 

• End RPM

  The value entered determines the maximum RPM allowed while the launch control input is in an active state. An example of this is where a clutch pedal switch or transbrake is used to activate launch control. When triggered the engine will rev to a ...

• RPM Limiter

  The RPM Limiter is used to prevent engine damage by shutting down injection or ignition outputs at a set engine speed. Page Contents RPM Limiter Tab Cut Method Injection Ignition Cut Type Hard Cut Soft Cut Hysteresis Related Tables RPM Limiter End ...

• Target RPM

  Only available when Controller Mode is set to Closed Loop. This table sets the RPM that the Idle Control will try and achieve.

• Auxiliary RPM Limiter

  The Auxiliary (Aux) RPM Limiter function is used where a temporary lower RPM Limit is required. This is sometimes used for basic launch control or valet purposes. The Aux RPM Limiter requires an input to the Elite ECU to activate this function. Page ...