Related Articles
Engine Functions
This page is used to enable and disable any Engine Function nodes in the Navigation Tree. Function names can be clicked on to navigate to that functions relevant tree node. Any errors will be highlighted in red for your attention.
Engine Configuration
Engine Configuration The Engine Configuration node contains basic configuration information about your engine. Engine Information Engine Capacity The Displacement of the engine. The units for Displacement are selected in the NSP software under ...
Bump/Creep Duty Cycle
Bump/Creep Duty Cycle Table This table sets the Duty Cycle when the bump/creep button is pressed, with 0% meaning the trans=brake is fully off, and 100% meaning the trans-brake is fully on. Up to 3D mapping is available.
Engine Control Relay
Engine Control Relay The Engine Control Relay function allows the Nexus ECU to control the 12V+ power supply to certain parts of the engine management, such as injectors and ignition coils. This function should remain enabled when a Haltech supplied ...
Mapping an Engine
Mapping the engine involves filling the look-up tables with the correct values for your engine. The tables are calibrated for an engine by adjusting the values of the cells within the tables. WARNING Driving a vehicle over time, on poorly tuned maps ...