Engine Functions

This page is used to enable and disable any Engine Function nodes in the Navigation Tree. 

Function names can be clicked on to navigate to that functions relevant tree node.

Any errors will be highlighted in red for your attention. 

• Related Articles

• Fuel Pressure Sensor, Diagnosis, and Engine Protection

  This guide is based on the TI 150 psi pressure sensor.  Other sensors can be used however please check wiring and calibration data to suit the sensor. About Haltech Part HT-010904 A fuel pressure sensor is a sensor that can read up to around 150 to ...

• SR20 Engine

  The Nissan SR20DET and DE engine SR20DET Turbo   SR20DE Aspirated Haltech ECU Options ECU Model Plug In Available OEM Functions Not Supported Suitable Installation Type Support Sequential and/or Direct Fire Ignition Platinum Pro S15 ...

• Engine Configuration

  Engine Configuration The Engine Configuration node contains basic configuration information about your engine. Engine Information Engine Capacity The Displacement of the engine. The units for Displacement are selected in the NSP software under ...

• Engine Control Relay

  Engine Control Relay The Engine Control Relay function allows the Nexus ECU to control the 12V+ power supply to certain parts of the engine management, such as injectors and ignition coils.  This function should remain enabled when a Haltech supplied ...

• Mapping an Engine

  Mapping the engine involves filling the look-up tables with the correct values for your engine. The tables are calibrated for an engine by adjusting the values of the cells within the tables. WARNING Driving a vehicle over time, on poorly tuned maps ...