Generic Correction

EVAP Generic Correction Table

This table allows for any generic correction to be applied to the EVAP Solenoid duty cycle (eg. limiting duty with TPS)

 2D mapping is available and any channel can be used as the axis.

• Related Articles

• Generic Correction

  The Target Lambda Generic Correction table is a user-configurable table that allows configuration to be tailored to your needs. By default, this correct table contains only one value which will create an offset of the entire Target Lambda table. This ...

• Generic Correction

  Ignition Generic Correct Page - Unpopulated Generic Correction General purpose ignition timing correction table where custom axis can be configured by clicking on the GRID icon at the top of the screen, or by pressing the F3 key. Positive values will ...

• Generic Fuel Correction

  Generic correction tables are user-defined tables that can be conditionally applied. Up to 4 Generic Tables are available. When enabled, a Conditions node will appear as a child to the Generic node where a Custom Name can be given to the correction ...

• Ignition Correction

  This table sets an ignition correction that allows for ignition timing to be advanced or retarded when the RPM is above or below the Target RPM, and idle control is active. Typically the timing will be advanced when below the Target RPM to add engine ...

• MAP Correction

  This table controls additional fuel against Manifold Pressure.  When the Tuning Method is Volumetric Efficiency, the ECU is already compensating for Manifold Pressure and therefore this table is treated as an additional correction. Before tuning ...