Ford Travel Assistance Service
The Ford Travel Assistance Service Function supports the factory Ford Collision Detection, whereby in the event that a collision is detected, the car doors will unlock.
If the Travel Assistance Service module has been removed from your vehicle, this function will cause an error code (or DTC) to appear - in this case, turn the function off to remove the DTC.
Wiring Tab
Connections
Input
Collision Detection Input will be automatically selected as the OEM Input for the Ford Pro Plugin
Output
The Output will be automatically set to the vehicle CAN bus for the Ford Pro Plugin
Related Articles
Vehicle CAN Support
BA The Ford Falcon Elite Pro Plug-in has extensive BA 6 cylinder Falcon CAN support integrated into the software. Once the initial setup is done, the Haltech Pro Plug-in will interface with all modules within the vehicle. Some of the functions ...Shock Travel Sensors
Shock Travel sensors are used to monitor suspension deflection, through shock absorber movement - m onitoring even the slightest amount of shock travel or tire shake. This is the common method of tracking suspension and tire performance. Wiring Tab ...LPG Function
LPG function is used when a vehicle has a LPG system fitted to the engine.Wiring a switch input for LPG select enables the ECU to disable the injectors and fuel pump when the LPG switch is active. Page Contents Wiring Tab Connections Switch Input ...Torque Converter Control Function
The Torque Converter Control function allows the electronic control of the torque converter lockup, as well as the ability to "dump" torque converter line pressure in order to control engine power in a drag racing application, as well as assisting ...Automatic Transmission - Ford Falcon 6 Speed
The Automatic Transmission - Ford Falcon 6 Speed Function supports the ZF 6HP26 6-Speed Transmission found in the BF and FG Series Falcons. The ZF Transmission Control Module (TCM) uses the vehicle's CAN bus to transmit engine torque limits and ...