Flat Shift Wiring

Flat Shift Wiring

Wiring



This node allows you to assign an ECU Input for the Flat Shift switch. Any available AVI or SPI may be used.
    • Related Articles

    • Flat Shift

      Flat Shift The Flat Shift function allows for full throttle gear changes to occur without throttle lifting. There are a number of types of Flat Shift but this is commonly used for sequential gearboxes with an input from a load cell. The engine power ...
    • Flat Shift Link Delay

      Flat Shift Link Delay Table This table is only available if Flat Shift Link Option is enabled in the Transmission Control function. How much time between the Flat Shift Torque Reduction and/or Throttle Blip and the Transmission Control outputs ...
    • Transmission Control Wiring

      Wiring Options Number of Outputs - This setting is only required for some Transmission Types. It is greyed out when the ECU can determine the number of outputs from the Transmission Type and/or the Number of Gears (e.g. GM 4L60 uses 2 gear select ...
    • Flat Shift / Throttle Blip

      The Flat Shift / Throttle Blip function allows for full throttle gear changes to occur without throttle lifting. There are a number of types of Flat Shift but this is commonly used for sequential gearboxes with an input from a load cell. The engine ...
    • Transmission Control

      Transmission Control The Transmission Control function is able to control multiple styles of transmission. Some conventional automatic transmissions such as the Toyota A340e, pneumatically actuated sequential transmissions, as well as pneumatically ...