Gear Ratios

Gear Ratios

This allows the relationship between engine speed and vehicle speed to be entered so that the ECU can detect the gear position. A vehicle speed sensor is required to be wired in and calibrated before this process can be completed.

Page Contents

Gear Ratio Tab

Calibrate

The calibration process required involves driving the vehicle while connected to the ESP software, and pressing the Calibrate button in each gear. Alternately, each of the values can be manually entered if they are known.



    • Related Articles

    • Gear Ratios

      Gear Ratios This allows the relationship between engine speed and vehicle speed to be entered so that the ECU can detect the gear position. A vehicle speed sensor is required to be wired in and calibrated before this process can be completed.  ...

    • Gear Detection

      The Gear Detection function allows the Elite ECU to know or to calculate which gear the transmission is in either for tuning or datalogging purposes. This can be achieved by a gear position sensor, a gear ratio calculation simply by the use of a ...

    • LPG Function

      LPG function is used when a vehicle has a LPG system fitted to the engine.Wiring a switch input for LPG select enables the ECU to disable the injectors and fuel pump when the LPG switch is active. Page Contents Wiring Tab Connections Switch Input ...

    • Torque Converter Control Function

      The Torque Converter Control function allows the electronic control of the torque converter lockup, as well as the ability to "dump" torque converter line pressure in order to control engine power in a drag racing application, as well as assisting ...

    • Gear Switch

      Gear Switch The Gear Switch node is only available if Gear Detection Type is set to Gear Switch in the Gear Detection function. Gear Switch Reset Time The amount of time after the Clutch Switch has been activated before the Gear Number will reset to ...