Generic Timer

Generic Timer

Generic Timer

A Generic Timer is used when a channel or function is required over a time base, and activated by another channel or condition.  Typical uses for Generic Timers are for drag racing launch programming, or programming delays for custom functions.



Settings

Name - Sets the name that is to be used for the Generic Timer. This name will be used when searching for channels throughout the system.

Start Condition

Select which ECU channel and its conditions will start the timer.

Select - Selection of the ECU channel to be used to start the timer.
Maths - A selection of Equal To, Not Equal To, Greater Than, Less Than, Greater Than Or Equal To, Less Than Or Equal To that is to be used to start the timer.
Value - The value the maths must meet.


Reset Condition

Select which ECU channel and its condition will reset the timer, and allow the Generic Timer to start again if Start Conditions are met.

Select - Selection of the ECU channel to be used to reset the timer.
Maths - A selection of Equal To, Not Equal To, Greater Than, Less Than, Greater Than Or Equal To, Less Than Or Equal To that is to be used to reset the timer.
Value - The value the maths must meet.

    • Related Articles

    • Race Timer

      The Race Timer is commonly used in drag racing applications, as things like boost control and ignition timing have to vary as the race progresses. However, there's nothing to stop it being used for circuit racing or other purposes. The Race Timer ...

    • Race Timer

      The Race Timer is commonly used in drag racing applications, as things like boost control and ignition timing have to vary as the race progresses. However, there's nothing to stop it being used for circuit racing or other purposes. The Race Timer ...

    • Turbo Timer

      Help text for this item is coming soon.

    • Turbo Timer Time Configuration

      Help text for this item is coming soon.

    • Generic Correction

      Ignition Generic Correct Page - Unpopulated Generic Correction General purpose ignition timing correction table where custom axis can be configured by clicking on the GRID icon at the top of the screen, or by pressing the F3 key. Positive values will ...