Getting all the relevant information displayed on your Tuning Page within the ESP software will make your tuning process much easier. In this step-by-step tutorial we show you how to set up your Tuning Page and add any relevant channels.
More functions, more flexible maps, upgraded data logging, self learning, and a host of additional features are all contained in the new Elite 2500 ECU, but to access them you will need to use the all new ESP software. Let’s take a quick look at some ...
The Elite Software Programmer allows the user to setup multiple tuning pages, or tabs. These tuning pages can be configured individually and populated with displays. Tuning tabs To move between Tuning Pages, use the 'Tab' key or alternatively click ...
You should also have the engine running at operating temperature before doing any tuning of the base maps. Go to the Engine Data Page at this point and check all the sensor inputs are reading correctly, and that the temperatures have stabilised ...
Tuning Method Injection Time The fuel table contain the base injection time for the given load and RPM at which the engine is operating. The base fuel map has the greatest influence on the air/fuel (A/F) mixtures. With injection time tuning, you ...
Basic Closed Loop Setup Procedure See Boost Control on how to get some basic parameters in place to allow the closed loop boost controller to operate. It is assumed that all the target boost levels are above the wastegate spring pressure. The ...