Indicators

Indicators

When enabled, this function allows users to set up an indicator (turn signal) light output.

Output Mode

      Constant: This will provide a constant output, relying on an external system to pulse power to the light. 

      Pulsing: This will pulse the indicator output at a 50% duty cycle, with a duration set in the Flash Period setting in milliseconds.

Hazard Lights

      When enabled, users can set up an input to turn indicator bulbs into hazard/warning lights.

CAN Display Information

      The NEXUS VCU can share information with other Haltech CAN displays (ie. IC-7). Users will be able to see on their IC-7 display that the headlights are enabled.

• Related Articles

• Indicator Wiring

  Wiring Left Indicator Input       This node allows you to assign the input for the left indicator input.             Edit - Click to assign/reassign an available input as Left Indicator Input.             Clear - Click to reset Input assignment. ...

• Turbo Timer Time Configuration

  Help text for this item is coming soon.

• Engine Configuration

  Engine Configuration The Engine Configuration node contains basic configuration information about your engine. Engine Information Engine Capacity The Displacement of the engine. The units for Displacement are selected in the NSP software under ...

• Electrical

  This page controls the engine startup and shutdown features such as Ignition switch, Engine Control Relay, Starter Motor Relay, as well as vehicle lights control. Function names can be clicked on to navigate to that function's relevant tree node. Any ...

• Staging Indicator

  This function uses an output to indicate when the engine is in the staging section of map, i.e When the load has increased beyond the Staging Load Bar in the Fuel Setup page.There are no parameters to setup for this output. This output will not ...