Introduction

Introduction

Before you begin this section of the manual, make sure that you are able to start your engine and achieve a steady idle. This section of the manual will guide you through the tuning of your fuel, ignition and correction maps for your vehicle.
This Tuning Guide assumes basic knowledge of engine management concepts with regard to injectors, ignition coils, crank & cam sensors and various other engine management sensors.

    • Related Articles

    • Welcome to Elite Software Programmer

      This help document describes the operation of the Elite Software Programmer. To start Elite Software Programmer please click on the newly created ESP desktop Icon to start the software. Haltech Elite Software Programmer Icon Area's of the Elite ...

    • Going Online with the Software

      Start the Elite Software Programmer by double clicking on the Haltech Elite Software Programmer (ESP) Icon. Haltech Elite Software Programmer Icon Connect the ECU to the laptop via the supplied USB cable. With power applied to the ECU (Ignition On if ...

    • Tuning Pages

      The Elite Software Programmer allows the user to setup multiple tuning pages, or tabs. These tuning pages can be configured individually and populated with displays. Tuning tabs To move between Tuning Pages, use the 'Tab' key or alternatively click ...

    • How to customise your ESP Tuning Page

      Getting all the relevant information displayed on your Tuning Page within the ESP software will make your tuning process much easier. In this step-by-step tutorial we show you how to set up your Tuning Page and add any relevant channels.

    • Tuning Base Tables

      Tuning Method  Injection Time  The fuel table contain the base injection time for the given load and RPM at which the engine is operating. The base fuel map has the greatest influence on the air/fuel (A/F) mixtures.  With injection time tuning, you ...