PgUp

Increase Cell Value

PgDn

Decrease Cell Value

Ctrl + PgUp

Small Increase of Cell Value

Ctrl + PgDn

Small Decrease of Cell Value

Shift + PgUp

Large Increase of Cell Value

Shift + PgDn

Large Decrease of Cell Value

0 - 9

Set the Tuning Table cell value

Arrow

Moves the selected cell(s) pointer

Shift + Arrow

Increases the number of selected cells

Ctrl + Arrow

Decreases the number of selected cells

Alt + Arrow

Change the selected map

Tab

Selects the next Tuning Page

Shift + Tab

Selects the previous Tuning Page

Space

Aligns the cursor to current engine operating point

Ctrl + Space

Shrinks the selection to a single cell

F1

Open Help Window

F3

Axes Setup

F4

Main Setup

F5

Connect / Disconnect from ECU

F6

Start/Stop Recording PC Datalogging

F7

Enter/Exit Datalog Playback Mode

F8

Play/Pause Currently Loaded Datalog - Playback Mode Only

F11

Full Screen Mode

Ctrl - A

Select all the cells in the current Tuning Table

Ctrl - C

Copy

Ctrl - V

Paste

Ctrl - F12

Reboot ECU

P

Percentage increase or decrease the selected cells

L

Linearize across the selected cells

T

Enables/Resets/Disables Trace in Text View

Insert

To insert a Row/Column in Tuning Table

Delete

To delete a Row/Column in Tuning Table

Home

Moves the selected cell(s) to the Left of the Tuning Table

End

Moves the selected cell(s) to the Right of the Tuning Table

Ctrl+Shift+Arrow

Copy the current Tuning Table value to an adjacent cell.

Ctrl+Shift+(Any key other than arrow)

Tab page shortcut. If the shortcut does not exist, the current tab will be assigned the shortcut.

R

Toggle All Ranges Mode of selection.

A

Toggle All Ranges Above mode of selection. Only available when All Ranges Mode is enabled.

Q

Performs Quick Tune Function on the cell currently used by the ECU. Only available when a Wideband O2 Sensor is enabled.

W

Performs Quick Tune Function on the cell currently used by the ECU as well as the cells higher in RPM and Load. Only available when a Wideband O2 Sensor is enabled.