Knock Control

Knock Control

Here is an overview on Knock Control using the Haltech ECU


    • Related Articles

    • What is knock and why you should control it

      This article will provide you with a background knowledge of what ‘knock’ is, how it comes about and what the ECU does to detect and prevent/limit damage occurring if knock does occur.   What is Knock? Knock, pinging, detonation, pre-detonation, ...
    • Knock Control User's Guide

      Introduction What is the Elite Knock Control function and how do you use it.  Knock Detection and Knock Control are only available on the Nexus VCU and Elite 1000 and higher models. Hey, guess what? We've got a great article here to read and a video. ...
    • Knock Control

      How does knock control work ? Knock Control is used to retard the ignition timing in the case that engine knock is detected by the sensors. By enabling short term retard, the knock is reduced, creating a safer system, and protecting the engine from ...
    • Knock Threshold

      Knock Threshold The Knock Threshold table is used to allow the system to know when knock has occurred compared to normal background noise. The values in this table are the knock level above which true engine knock is said to be occurring. To set up ...
    • Knock Detection

      Knock Detection Allows the ECU to monitor engine knock by enabling up to 2 knock sensors. Knock Detection is the configuration and setup of the detecting portion of the knock system in the ECU. For settings related to Knock Control (such as retard ...