Fuel Correction
Launch Control Fuel Enrichment Table
This table allows 3D (8x8) fuel corrections to be applied while the Launch Control is active. Often additional fuel is added to assist with turbo spool up when near to the desired RPM for launch. This is typically mapped over RPM and Load and should have values of 0% when not under actual launch RPM and Load.
Related Articles
Per Cylinder Fuel Correction
The Cylinder correction tables allow a per-cylinder fuel correction to be made. This is commonly used to balance fuel delivery due to injector flow differences, intake manifold flow differences, or any contributing factor that would cause an ...Overall Fuel Correction
Overall Fuel Correction This table is only active if enabled in the Nitrous Controller node. This table applies a fuel correction to all cylinders and is active whenever this nitrous stage is active. Numbers in this table can be expressed as ...Generic Fuel Correction
Generic correction tables are user-defined tables that can be conditionally applied. Up to 4 Generic Tables are available. When enabled, a Conditions node will appear as a child to the Generic node where a Custom Name can be given to the correction ...Gear Correction
This table allows for a fuel correction based on the current Gear. This table is a 4D table and therefore each gear position has its own 3D table for correction. Use the slider to select the appropriate 'slice' for the relevant gear correction ...Pit Lane Speed Limiter Fuel Correction
Fuel Correction The fuel percentage correction when Pit Lane Speed Limiter is active. Positive numbers represent addition fuel being added, negative numbers represents fuel delivery being reduced while the Pit Lane Speed Limiter function is active.