Max Pressure

Air Conditioner Maxiumum Pressure

The value sets the maximum refrigerant pressure where the ECU will turn the air conditioner compressor off.

This value varies varies according to your specific application.

• Related Articles

• Power Steering Pressure Sensor

  The Power Steering Pressure Sensor is used by the ECU to monitor pressure, and to perform tasks such as idle up when the pressure increases. The pressure sensor will also highlight any diagnostics in the Software if the pressure exceeds the indicated ...

• Manifold Pressure Sensor

  Manifold Pressure Sensor The Manifold Absolute Pressure (MAP) sensor is used to convert the manifold pressure into an electrical signal for the ECU to use. The sensor works in absolute pressure, thus its calibration is not affected by changes in ...

• Manifold Absolute Pressure (MAP) Sensor

  A Manifold Pressure Sensor, commonly referred to as a MAP Sensor, is used to measure vacuum or boost in the inlet manifold, and is often used as the primary load input to the Elite ECU.  A MAP Sensor is a powered sensor that typically has three ...

• Air Conditioner Pressure

  An Air Conditioner Pressure Sensor allows the ECU to continuously monitor the pressure of the air conditioning system for safety purposes. An analog Air Conditioner Pressure Sensor is a powered sensor that typically has three wires; a 5V+ power wire, ...

• Crank Case Pressure Sensor

  The Crank Case Pressure Sensor is used to monitor the pressure of the Crankcase, and signal a warning if the pressure falls below the minimum or above the maximum indicated pressure. Overpressure is often due to excess 'blowby', or combustion gasses ...