Max TPS

DBW Max TPS Table

This table sets the maximum position that the ECU will open the throttle to (as a percentage). Up to 4D mapping is available.

• Related Articles

• Throttle Position Sensor input

  The throttle position sensor is mounted to the throttle butterfly shaft to measure its rotation. A TPS is common on many late model engines and the Haltech sensor should attach with little or no modification. The throttle shaft must protrude from the ...

• Throttle Position Sensor - Finding the Correct Wiring

  This guide is to help find the correct wiring of a Throttle Position Sensor (here in referred to as a TPS) when the information is not provided by the manufacturer. What is a TPS? A TPS provides throttle opening angle information the engine ...

• Pit Lane Speed Limiter DBW Throttle Max

  (Optional) DBW Throttle Max The maximum Drive-By-Wire throttle opening when the Pit Lane Speed Limiter is active. By default this map is setup using the "Pit Lane Speed Limiter Before Cut" channel as the map axis. This channel represents how far the ...

• Delta Load

  The Delta Load is the change of throttle position over a 10ms time frame. This is the rate of throttle position movement. A fast throttle movement could have a TPS rate of change of 15% this means that in a time frame of 10ms the throttle position ...

• Fuel Cranking

  The cranking fuel table is used to deliver a volume of fuel after the prime pulse but while the engine is below the Max Cranking RPM. This aids in providing the engine with additional fuel that may be required to star the engine after the prime ...