Nitrous Enable

Nitrous Enable

Nitrous Enable

Nitrous Enablers act as the master switch to enable or disable one or more stages. Up to 4 Enablers can be configured, and your Nitrous Stages can be assigned to these enablers how you see fit.

Nitrous Enable

Switch Enable -This allows the use of an input pin to trigger the override function. If disabled, you can use the Conditional Enable

Condition Enable - The Enable function can also be triggered using conditions. These conditions can be used With or Without the Enable switch.

    • Related Articles

    • Nitrous Enable Wiring

      Wiring This node allows you to assign the input for the Nitrous Enable Switch. Any available AVI (Analogue Voltage Input) or SPI (Synchronised Pulsed Input) can be used.
    • Nitrous – the forgotten power adder

      Today we’re exploring Nitrous Oxide. What it is, how it works and most importantly – how to use it to make power! How forced induction works In order to make power our engines need air, the more air we can get into them, whether it be by increasing ...
    • Nitrous Controller

      Nitrous Controller Progressive Settings Progressive Control Checking this box enables Progressive Nitrous Control, and causes the N2O Solenoid Duty Cycle table to appear in the tree. Frequency The PWM switching frequency for nitrous solenoids Timer ...
    • Nitrous Control

      Haltech's Nitrous control functionality is designed to allow either wet or dry nitrous kits to be added to your vehicle in up to 6 stages. The ECU controls when to switch on each stage, according to when both safe operating conditions and activation ...
    • Nitrous Stages

      Wiring Tab Options Fuel Solenoid Control Output Frequency Connections Output Active State Settings Tab General Progressive Control Frequency Timer Mode Resume Hold Reset Activation Mode Race Timer Vehicle Speed Always Active Trans Brake Release ...