Nitrous Enable Wiring

Wiring

This node allows you to assign the input for the Nitrous Enable Switch. Any available AVI (Analogue Voltage Input) or SPI (Synchronised Pulsed Input) can be used.

• Related Articles

• Nitrous Enable

  Nitrous Enable Nitrous Enablers act as the master switch to enable or disable one or more stages. Up to 4 Enablers can be configured, and your Nitrous Stages can be assigned to these enablers how you see fit. Nitrous Enable Switch Enable -This allows ...

• Nitrous Pressure Sensor

  A Nitrous Pressure Sensor can be used with your ECU for datalogging and for Engine Protection purposes, to conditionally de-activate a nitrous stage based on bottle pressure, or to activate a bottle heater blanket based on bottle pressure. Up to 4 ...

• Nitrous Relay Wiring (Multistage)

• Nitrous Stages

  Wiring Tab Options Fuel Solenoid Control Output Frequency Connections Output Active State Settings Tab General Progressive Control Frequency Timer Mode Resume Hold Reset Activation Mode Race Timer Vehicle Speed Always Active Trans Brake Release ...

• Nitrous Enablers

  Nitrous Enablers act as the master switch to enable or disable one or more stages. Up to 4 Enablers can be configured, and your Nitrous Stages can be assigned to these enablers how you see fit. Wiring Tab Options Switch Enable Connections Input SPI ...