Nitrous Override

Nitrous Override

Nitrous Override

Nitrous Overrides can be used to activate the nitrous stage regardless of the activation conditions and modes. Most commonly this is either in an engine purge situation (commonly known as 'burping'), or when the driver would like to activate the stage with a button press.


Nitrous Override

Minimum Engine Running Time - This is the minimum time the engine must have been running for before the override function can be triggered.

Minimum TPS - The throttle position must be equal to or greater than this value for the override function to be triggered.

Minimum RPM - The engine RPM must be equal to or greater than this value for the override function to be triggered.

Switch Enable - This allows the use of an input pin to trigger the override function. If disabled, you can use the Conditional Enable.

Conditional Activation

The override function can also be triggered using conditions. These conditions can be used With or Without the override switch.


    • Related Articles

    • Nitrous Enable

      Nitrous Enable Nitrous Enablers act as the master switch to enable or disable one or more stages. Up to 4 Enablers can be configured, and your Nitrous Stages can be assigned to these enablers how you see fit. Nitrous Enable Switch Enable -This allows ...

    • Nitrous Control

      Haltech's Nitrous control functionality is designed to allow either wet or dry nitrous kits to be added to your vehicle in up to 6 stages. The ECU controls when to switch on each stage, according to when both safe operating conditions and activation ...

    • Nitrous Controller

      Nitrous Controller Progressive Settings Progressive Control Checking this box enables Progressive Nitrous Control, and causes the N2O Solenoid Duty Cycle table to appear in the tree. Frequency The PWM switching frequency for nitrous solenoids Timer ...

    • Nitrous Stages

      Wiring Tab Options Fuel Solenoid Control Output Frequency Connections Output Active State Settings Tab General Progressive Control Frequency Timer Mode Resume Hold Reset Activation Mode Race Timer Vehicle Speed Always Active Trans Brake Release ...

    • Nitrous Overrides

      Nitrous Overrides can be used to activate the nitrous stage regardless of the activation conditions and modes. Most commonly this is either in an engine purge situation (commonly known as 'burping'), or when the driver would like to activate the ...