Nitrous Relay Wiring (Multistage)

• Related Articles

• Engine Control Relay ( ECR )

  The engine control relay is the main relay that is used to enable and disable power to the engine management components. The Elite 2500 has one dedicated engine control relay output (DPO 6 (Black/Red)) capable of sinking 1A Max current ( ie 5 x 80 ...

• Nitrous – the forgotten power adder

  Today we’re exploring Nitrous Oxide. What it is, how it works and most importantly – how to use it to make power! How forced induction works In order to make power our engines need air, the more air we can get into them, whether it be by increasing ...

• Nitrous Stages

  Wiring Tab Options Fuel Solenoid Control Output Frequency Connections Output Active State Settings Tab General Progressive Control Frequency Timer Mode Resume Hold Reset Activation Mode Race Timer Vehicle Speed Always Active Trans Brake Release ...

• Engine Control Relay

  Engine Control Relay The Engine Control Relay function allows the Nexus ECU to control the 12V+ power supply to certain parts of the engine management, such as injectors and ignition coils.  This function should remain enabled when a Haltech supplied ...

• ECU controlled Nitrous Injection

  Nitrous injection is one of the simplest and cost-effective ways to get more horsepower from your engine. Relatively easy to fit and set up, nitrous provides an instant power boost at your finger tips. How Nitrous Injection works Nitrous Oxide has ...