Related Articles
Headlights Wiring
Wiring Headlight Input This node allows you to assign the input for the headlamps. Edit - Click to assign/reassign an available input as Headlight Input. Clear - Click to reset Input assignment. High Beam Input ...
Variable Value Lift Wiring
Wiring Options Input Mode - Select the input mode (CAN) Output Mode - Select the output mode (CAN) Connections Bank 1 Input - Select an appropriate input connection (from the CAN Bus). Each variable cam must have position sensor information so the ...
Start Motor Wiring
Wiring This node allows you to assign the output for the Starter Motor Relay. NOTE: Starter Motors draw extremely large amounts of current and thus MUST be wired via a Starter Motor Solenoid. Starter Motor solenoids also draw large amounts of current ...
Idle Control Wiring
This article explains the most common types of idle air control valves and how to wire them up using a Haltech Nexus or Elite ECU: Bypass Air Control (BAC) Two Wire This type of idle valve is the simplest to wire up, being a solenoid with just two ...
Power and Ground Wiring
Black (Battery Ground) Red_Green / Red / Red_White (Battery Supply 12V) Pink (Ignition Switch 12V) Locate and connect the following flying leads.(Wiring based on the Haltech Elite Premium Harnesses)