Cut Percentage

Cut Percentage

Flat Shift Cut Percentage Table




Available when the Flat Shift Mode includes fuel and/or ignition cuts. This allows for up to 3D (8x8) mapping of the percentage cut to be applied during a flat shift in order to reduce torque.

    • Related Articles

    • Cut Percentage

      When the Cut Percentage Traction Control method is selected this table controls the rate of ignition or fuel cut events based on the Traction Control Slip Error. Higher wheel slip error results in increased power reduction. Traction Control Slip ...

    • Cut Percentage

      Available only when the Cut Type is set to Cut Off. Allows the user to apply a user definable percentage cut to the engine, over a range of conditions. This can be mapped in 3D (8x8).

    • Driveshaft RPM Percentage Cut

      Help text for this item is coming soon.

    • Engine RPM Percentage Cut

      Help text for this item is coming soon.

    • Flow Percentage

      This table controls the percentage of total fuel delivery that this stage of injection will deliver to the engine. This table is only available for Injection Stage 2 and above, and when 'Nexus Style' staging is used. NOTE: Incorrect tuning of the ...