Power LED

Power LED

The Power LED shows the ECU's power and running status by displaying different colours and flashing sequences. Power LED descriptions are listed in the table below.

Colour

Flashing Sequence

Description

Off

Solid

No Power

Red

Solid

System Error

White

Solid

Normal Operation
Green
Solid
Normal Operation. ECU has v3 firmware and requires NSP Software to communicate

Blue

Solid

Boot Mode / Firmware Update in Progress


    • Related Articles

    • Power LED

      The Power LED shows the ECU's power and running status by displaying different colours and flashing sequences. Power LED descriptions are listed in the table below. Colour Flashing Sequence Description Off Solid No Power Red Solid System Error White ...

    • Status LED

      The Status LED indicates the current status of the ECU by displaying different colours and flashing sequences. Status descriptions are listed in the table below. Colour Flashing Sequence Description Off Solid No Power to ECU Or Normal Operation Red ...

    • Status LED

      The Status LED indicates the current status of the ECU by displaying different colours and flashing sequences. Status descriptions are listed in the table below. Colour Flashing Sequence Description Off Solid No Power to ECU or Normal Operation Red ...

    • Check Power and GND and Communications

      Leaving your ignition modules and injectors disconnected, power up the ECU by turning on the vehicle's Ignition power. Check that the ECU is powered up and that you are able to communicate with the ECU using a laptop running Elite Software ...

    • Power and Ground Wiring

      Black (Battery Ground) Red_Green / Red / Red_White (Battery Supply 12V) Pink (Ignition Switch 12V) Locate and connect the following flying leads.(Wiring based on the Haltech Elite Premium Harnesses)