Power LED

Power LED

The Power LED shows the ECU's power and running status by displaying different colours and flashing sequences. Power LED descriptions are listed in the table below.

Colour

Flashing Sequence

Description

Off

Solid

No Power

Red

Solid

System Error

White

Solid

Normal Operation

Green
Solid
Normal Operation. ECU has v3 firmware and requires NSP Software to communicate

Blue

Solid

Boot Mode / Firmware Update in Progress

    • Related Articles

    • Status LED

      The Status LED indicates the current status of the ECU by displaying different colours and flashing sequences. Status descriptions are listed in the table below. Colour Flashing Sequence Description Off Solid No Power to ECU or Normal Operation Red ...

    • Status LED

      The Status LED indicates the current status of the ECU by displaying different colours and flashing sequences. Status descriptions are listed in the table below. Colour Flashing Sequence Description Off Solid No Power to ECU Or Normal Operation Red ...

    • Power LED

      The Power LED shows the ECU's power and running status by displaying different colours and flashing sequences. Power LED descriptions are listed in the table below. Colour Flashing Sequence Description Off Solid No Power Red Solid System Error White ...

    • Plug-in Model Selection

      Plug-in Information Model Setup Some factory pin locations and functionality vary between vehicle variants. Upon making a Plug-In Information "Model" selection (referenced in Initial ECU Setup), the hardware configuration is set and the on-board ...

    • Elite Pro Plug-in ECU to Suit Ford Falcon I6 "Barra"

      Vehicle Compatibility Ford Falcon BA (02-05) I6 4.0-litre DOHC VCT "Barra" Engine with Manual Transmission Ford Falcon BF (05-08) I6 4.0-litre DOHC VCT "Barra" Engine with Manual Transmission Ford Falcon BF (05-08) I6 4.0-litre DOHC VCT "Barra" ...