Recirc Valve Wiring

Wiring

This node allows you to assign the output for the Recirculation Valve. This will typically be a DPO.

• Related Articles

• Variable Valve Lift

  Variable Valve Lift Variable Valve Lift supports the Nissan 370Z VVEL module (Variable Valve Event and Lift System) as a standalone application. The 370Z CAN Bus must be Selected in Connections > CAN > Vehicle CAN System. See 370Z VVEL Control Module ...

• Tumble Generator Valve

  The Tumble Generator Valve Sensors are used to determine whether the Tumble Generator Valves (or TGVs) are open or closed. TGVs are valves found in Subarus, located on the lower part of the intake manifold, that open (and remain open) when the engine ...

• Wastegate Valve Position Sensor 1/2

  A Wastegate Valve Position Sensor can be used to monitor wastegate valve position and behaviour. It can be used to diagnose manifold pressure balance issues in twin-turbo applications and give insight into wastegate flow characteristics. On this ...

• Recirculation Valve

  The Recirculation valve helps to make your car more efficient by recirculating a portion of your exhaust and running it through the combustion process again.This results in a cooler, more complete burn of the fuel which decreases you car's noxious ...

• Variable Value Lift Wiring

  Wiring Options Input Mode - Select the input mode (CAN) Output Mode - Select the output mode (CAN) Connections Bank 1 Input - Select an appropriate input connection (from the CAN Bus). Each variable cam must have position sensor information so the ...