Reverse Lockout

Reverse Lockout

The Reverse Lockout function activates a reverse lockout solenoid above a set road speed. This ensures the transmission cannot be put into reverse when travelling forwards above the set speed.


Wiring Tab

Connections

Reverse Lockout Output

Select an available output wire, typically a DPO (Digital Pulsed Output) that will be connected to the reverse lockout solenoid.

Active State

Controls the whether the output is normal or inverted. Low will ground the output wire when the output is set to be On. Setting to High will invert this signal, with the output wire being grounded when the output is set to be Off, and not grounded when it is set to be On. (Default = Low)


Reverse Lockout Tab

Reverse Lockout Speed

The vehicle speed required to activate the reverse lockout solenoid.

    • Related Articles

    • LPG Function

      LPG function is used when a vehicle has a LPG system fitted to the engine.Wiring a switch input for LPG select enables the ECU to disable the injectors and fuel pump when the LPG switch is active. Page Contents Wiring Tab Connections Switch Input ...
    • Torque Converter Control Function

      The Torque Converter Control function allows the electronic control of the torque converter lockup, as well as the ability to "dump" torque converter line pressure in order to control engine power in a drag racing application, as well as assisting ...
    • Reverse Switch

      The reverse switch is used to determine when the vehicle is in reverse gear. Options Reverse Switch Input Mode - Select an appropriate input to use for the Reverse Switch Input. Select from either a digital switched input, or vehicle CAN input. ...
    • Reverse Switch

      The reverse switch is used to determine when the vehicle is in reverse gear . Wiring Tab Connections Reverse Switch Input Connection Type SPI/DPI Edge Select Sensor Type Pullup AVI Switch On Voltage Switch Off Voltage Example 1 Example 2 Wiring Tab ...
    • Reverse Lockout

      Reverse Lockout Settings Reverse Lockout Speed - The vehicle speed required to activate the reverse lockout solenoid. Wiring Reverse Lockout Output - Select an available output wire, typically a DPO (Digital Pulsed Output) that will be connected to ...