Secondary Off RPM

Sequential Twin Turbo Secondary Off RPM Table

This table sets the RPM at which the secondary turbo is deactivated. Up to  3D mapping is available

• Related Articles

• Sequential Twin Turbo

  Sequential Twin Turbo User's Guide Clicking the above link will open the guide in a new tab or if viewed from within NSP a new browser window. Sequential Twin Turbo function page The Sequential Twin Turbo function is used to control the valves that ...

• Sequential Twin Turbo User's Guide

  Sequential Twin Turbo Systems Explained This guide will be to explain how the FD RX7 and the JZA80 Supra sequential twin-turbo systems operate and how to tune them. Mazda RX7 FD3S 13B The RX7 system is supported by Haltech ECUs such as the Nexus R5, ...

• Secondary On RPM

  Sequential Twin Turbo Secondary On RPM Table This table sets the RPM at which the secondary turbo is activated. Up to  3D mapping is available

• Sequential Twin Turbo Wiring

  This node allows for configuration of outputs for the Sequential Twin Turbo system. An output must be selected for the Pre-Control Valve, Exhaust Valve, Charge Relief Valve and Charge Valve. Typically a DPO (Digital Pulsed Output) is used, but any ...

• Pre-Control Duty Cycle

  Sequential Twin Turbo Pre-Control Duty Cycle Table This table sets the duty cycle sent to the secondary turbo pre-control valve. Up to 3D mapping is available.