Stop Start Button Wiring

Wiring

This node allows you to assign the input for the Start/Stop Button. Any available AVI (Analogue Voltage Input) or SPI (Synchronised Pulsed Input) can be used.

CAN Keypad buttons may also be used.

Edit - Click to assign / reassign an available input as Start Button input.

Clear - Click to reset input assignment.

• Related Articles

• Start Stop Button

  Start / Stop Button General Type - Selects the button type for the start button.                   Momentary - The start/stop switch stays on only while the button is pressed.              On / Off Switch - The start/stop switch state will stay on ...

• Start Motor Wiring

  Wiring This node allows you to assign the output for Starter motor control. Starter motors draw extremely large amounts of current and therefore must be wired and controlled through the starter motor solenoid. You can do this by using a 25A or 8A ...

• Headlights Wiring

  Wiring Headlight Input       This node allows you to assign the input for the headlamps.             Edit - Click to assign/reassign an available input as Headlight Input.             Clear - Click to reset Input assignment. High Beam Input       ...

• Electrical

  This page controls the engine startup and shutdown features such as Ignition switch, Engine Control Relay, Starter Motor Relay, as well as vehicle lights control. Function names can be clicked on to navigate to that function's relevant tree node. Any ...

• Electrical Load Switch

  The Electrical Load Switch is used to determine when there is a significant electrical load on the charging system. This switch can be used as an idle up condition to help stabilise the idle rpm due to load on the alternator. This switch source is ...