Related Articles
Target Lambda
The Target Lambda table serves as a major part of the fuel delivery calculation in your Nexus ECU. It maps out the resultant mixture you want the engine to run at under various load and RPM points and is used in both open loop and closed loop ...
Shifting Target
Shifting Target Table This sets the target Line Pressure when the Transmission Control function is shifting between gears. If there is a base map available for your transmission, it is recommended to import the Target Pressure tables from there. If ...
Closed Loop Target Pressure
Only available when Boost Control Mode is set to Closed Loop. This table sets the boost pressure that the tuner would like to reach. The axes are user configurable and up to 4D mapping is available. For this example, a Haltech Trim Module is used ...
Post Start Target Offset
This table sets an amount of RPM that is added to the Target RPM upon engine startup. It is used to help an engine become stable after initial starting and is timed to eventually give no extra RPM. Up to 3D mapping is available.
Target Position
Target Position table Typically mapped over 3D with RPM and Engine Load, this table will be position of the valve from 0 to 100%. Low air flow conditions will use small values, and high airflow conditions will use large values. Up to 3D mapping is ...