Throttle Blip Amount
Throttle Blip Amount Table
Only available if Throttle Blip in enabled.
The commanded throttle position percentage. During a blip event, the throttle will open to this throttle position unless a conditional setting forces an exit. Up to 3D tuning is available.
Related Articles
Flat Shift
Flat Shift The Flat Shift function allows for full throttle gear changes to occur without throttle lifting. There are a number of types of Flat Shift but this is commonly used for sequential gearboxes with an input from a load cell. The engine power ...Flat Shift Link Delay
Flat Shift Link Delay Table This table is only available if Flat Shift Link Option is enabled in the Transmission Control function. How much time between the Flat Shift Torque Reduction and/or Throttle Blip and the Transmission Control outputs ...Throttle Blip Duration
Throttle Blip Duration Table Only available if Throttle Blip is enabled. The amount of time (in ms) for the blip to occur. A cell value of 1000 will incur a blip of set percentage to occur for 1000ms, or until a conditional setting forces an exit. Up ...Throttle Blip Gear Tolerance
Throttle Blip Gear Tolerance This table is only available if the Gear Tolerance Enable is onin the Flat Shift function. This setting is used by the Throttle Blip Gear channel to determine whether a vehicle is in gear or not at any point in time. This ...Flat Shift / Throttle Blip
The Flat Shift / Throttle Blip function allows for full throttle gear changes to occur without throttle lifting. There are a number of types of Flat Shift but this is commonly used for sequential gearboxes with an input from a load cell. The engine ...