Related Articles
Calibration
Calibration This node sets the calibration for the DBW throttle motor, TPS (Throttle Position Sensor) and APP (Accelerator Pedal Position Sensor). APP Calibration The Accelerator Pedal Position Calibration is a process whereby the ECU can learn the ...
Rotary Trim Modules
Rotary Trim Modules are used to trim functions based on switch position. Functions such as Boost Control and Torque Management are common cases for a Rotary Trim Module controlling an axis in a target or trim table. On this node, the Rotary Trim ...
Transmission Oil Temperature
A Transmission Oil Temperature Sensor can be used with your ECU for datalogging and for Driveline Protection purposes. Temperature sensors are typically two wire sensors; a signal wire that is connected to an AVI, and a signal ground wire. ...
Wastegate Pressure Sensor
The Wastegate Pressure Sensor function allows for monitoring of the pressure acting on top of the wastegate diaphragm. This pressure value is used as the controlled parameter when using CO2 Boost Control. Also known as 'Dome Pressure' or 'Hat ...
Torque Converter Pressure Sensor
The Torque Converter Pressure Sensor is used to monitor the fluid pressure within the transmissions torque converter. It can be used with your ECU for mapping of Transmission tables, for data logging and for Engine Protection purposes. A Torque ...