Toyota Coil On Plug (Yaris / ZZ) Ignition Coil

DESCRIPTION

Haltech does not sell this part.

For simplicity this ignition coil will be referred to as the ZZ Coil.

The ZZ ignition coil is a high output inductive coil with an internal igniter module designed to be installed directly on top of the spark plug.  These were found on many Toyota engines from the late 1990's through to current engines, and are commonly used in the aftermarket for coil conversions due to their high output and coil-on-plug design.  They gained popularity due to be available on the very common and cheap Toyota Yaris 1NZ engine, and also the 1ZZ and 2ZZ engines from the Corolla. Most Toyotas of the period used the same coil design with different connector angles and tube lengths.

SETTINGS

 Configuration

Haltech Elite Series Setting	Value
Ignition Mode	Direct Fire
Ignition Edge	Falling
Ignition Dwell Mode	Constant Charge

Dwell

Suggested dwell time for ZZ coils

 

WIRING

​

NOTES

12V Power Supply

The ZZ coil can draw up to 8A.  If high rpm and high power is being used, together with conventional 30A Relays to provide power, it may be necessary to have a separate fuse and relay for every pair of coils.  This is rare but it is possible.

If the wiring is also not cable of supplying the current required it can also limit the spark output.

• Related Articles

• Do I Need An External Igniter Module ?

  How to identify if an ignition coil has an internal igniter module or will it require an external igniter. How an ignition Coil Works The following is an excerpt from Wikipedia and explains the operation of an ignition coil. "An ignition coil ...

• Toyota 1FZ-FE Engine

  Information on the Toyota 1FZ-FE engine.  The 1FZ-F is a carburettor version and is not covered in this guide. 80-Series 1FZ-FE with Distributor ignition 100-series 1FZ-FE with Waste Spark ignition and crank/cam sensors Haltech ECU Options Engine is ...

• Toyota A340E Control

  There are a few different version of the Toyota A340E transmission, but this break down will cover the most common 2JZ-GTE version found in the USDM MK4 Supra. Even then, there are still a few version of the USDM MK4 Supra A340. If you have farther ...

• IGN-1A Ignition Coils

  ABOUT Description Haltech Part Number HT-020114 The IGN-1A coil is a high output inductive coil with an internal igniter module. Exceptionally high power levels can be achieved using this ignition coil, all the while retaining the benefits of longer ...

• LS1 Ignition Coil

  ABOUT Description Haltech Part Number HT-020102 The LS1 ignition coil is a high output inductive coil with an internal igniter module.  These were found on most General Motors LS1 Gen 3 engines and are commonly used in the aftermarket. it requires a ...