Transient Throttle Wiring

• Related Articles

• Throttle Position Sensor

  TPS Settings A Throttle Position Sensor (TPS) is required by the ECU for many purposes. It can be used for the primary load input for some applications. It is also used with Idle Control, Decel Cut, Transient Throttle, and many other functions. A TPS ...

• Throttle Position Sensor

  A Throttle Position Sensor (TPS) is required by the Elite ECU for many purposes. It can be used for the load input for some application. It is also used with Idle Control, Decel Cut, Transient Throttle, and many other functions. A TPS is a powered ...

• Transient Throttle

  What is Transient Throttle ? Transient Throttle is a fuel correction function used to compensate for an opening or closing throttle body. As the throttle is opened and air enters the inlet manifold there is a period of time where the manifold ...

• Transient Throttle Enhance

  The manifold pressure sensor used with the ECU is very fast. It can respond much faster than is required to track any sudden changes in load on your engine. However, the manifold pressure seen at the sensor input may not change as quickly as what is ...

• Transient Throttle Disenrich

  Disenrich Rate The rate at which fuel disenrichment is applied in response to a lift-off transient throttle event. This table is used to proportion the amount of disenrichment based on the rate of closing throttle movement and the throttle position ...