Turbo Timer Time Configuration

• Related Articles

• Turbo Timer

  Help text for this item is coming soon.

• Turbo Timer

  The Turbo Timer function allows the Elite ECU to keep the engine running for a programmed amount of time after the ignition key has been switched off. This is typically used to allow a turbo to keep down after hard use. This function requires the ...

• Engine Configuration

  Engine Configuration The Engine Configuration node contains basic configuration information about your engine. Engine Information Engine Capacity The Displacement of the engine. The units for Displacement are selected in the NSP software under ...

• Dwell Time

  This table sets out the Dwell Time for the ignition pulses in milliseconds. Also known as Charge Time. These values are specific to the ignition coil, and should be sourced from the ignition coil manufacturer/supplier. Setting a Dwell Time that is ...

• Sequential Twin Turbo Wiring

  This node allows for configuration of outputs for the Sequential Twin Turbo system. An output must be selected for the Pre-Control Valve, Exhaust Valve, Charge Relief Valve and Charge Valve. Typically a DPO (Digital Pulsed Output) is used, but any ...