Related Articles
Turbo Timer Time Configuration
Help text for this item is coming soon.
Turbo Timer
The Turbo Timer function allows the Elite ECU to keep the engine running for a programmed amount of time after the ignition key has been switched off. This is typically used to allow a turbo to keep down after hard use. This function requires the ...
Sequential Twin Turbo Wiring
This node allows for configuration of outputs for the Sequential Twin Turbo system. An output must be selected for the Pre-Control Valve, Exhaust Valve, Charge Relief Valve and Charge Valve. Typically a DPO (Digital Pulsed Output) is used, but any ...
Sequential Twin Turbo
Sequential Twin Turbo User's Guide Clicking the above link will open the guide in a new tab or if viewed from within NSP a new browser window. Sequential Twin Turbo function page The Sequential Twin Turbo function is used to control the valves that ...
Sequential Twin Turbo User's Guide
Sequential Twin Turbo Systems Explained This guide will be to explain how the FD RX7 and the JZA80 Supra sequential twin-turbo systems operate and how to tune them. Mazda RX7 FD3S 13B The RX7 system is supported by Haltech ECUs such as the Nexus R5, ...