Related Articles
Fuel Composition Correction
The Fuel Composition Correction table is used to add or remove fuel where required. The amount of correction applied by this table scales with the Fuel Composition Scalar table. Eg, if the Composition Scalar table output is 50%, then 50% of the ...
Fuel Composition Correction
This table applies a correction to the target lambda based on Fuel Composition. The output of this table scales with the Fuel Composition Correction Scalar value. Eg, when the Fuel Comp Scalar is 50%, then 50% of the values in this table are applied.
Per Cylinder Fuel Correction
The Cylinder correction tables allow a per-cylinder fuel correction to be made. This is commonly used to balance fuel delivery due to injector flow differences, intake manifold flow differences, or any contributing factor that would cause an ...
Fuel Composition Correction
Fuel Composition Timing Correction A degree amount correction table that allows for adjustment of ignition advance. Only used when a Flex Fuel Composition Sensor is connected. (Default = Disabled) Timing corrections inputted to this table are what ...
MAP Correction
This table controls additional fuel against Manifold Pressure. When the Tuning Method is Volumetric Efficiency, the ECU is already compensating for Manifold Pressure and therefore this table is treated as an additional correction. Before tuning ...